Nail styling is the basis of nail design. Even without nail polish, clean and tidy nails will give a pleasing impression. To make good-looking nails, you can start from the following two aspects: one is the trimming of the nail surface, and the other is the trimming of the finger edges.
Composition of manicure
Before explaining in detail how to fix the nails, let’s first understand the makeup of the nails. The nail is composed of nail mother, nail root, nail half moon, nail plate, nail bed, nail epithelium, dead skin, free line, nail tip, nail frame, nail groove, nasal hypodermis, C arc, etc.
Before repairing, confirm with the customer the type A that needs to be repaired. The manicurist can provide some suggestions based on the client’s hand shape, the length of his nails, and the style he wants to make. At the same time, they also need to ask the customer what the nail type and nail length are required, and then the nail artist can cut the nails according to the customer’s needs.
Nail clippers cut from the side
When cutting nails, most people always put the nail clippers between the nails, cut them with scissors, and then trim the nails on both sides. In fact, doing so is very harmful to the nails.
The nail itself has its own curvature. When the nail clippers are cut from the middle, the nails will first deform to a certain extent. After the nail clippers are fully attached to the nail surface, the blade can apply force. For the nail, the force it receives is distributed in the three cuts, which can easily cause the nail to crack.
The correct way to cut nails should be to cut from the side of the nail first, and cut a little bit less with each knife, so that the force of the nail clippers is on a curved nail surface, so that the nail can be better fitted to the nail without the need to cut the nail.
The rubbing strip is “come and never come back”
When trimming the nail shape with a file, the manicurist must pay attention to the one-way force. For example, grinding from left to right: When grinding from left to right, the file sticks to the nail and exerts force, but in the process of filing back, that is, moving from right to left, the file is at this time. The strip is not in contact with the surface of the nail, and does not act on the surface of the nail.
One-way nail grinding is firstly due to the back and forth grinding, the nails are stressed back and forth, and it is easy to delamination. At the same time, if you apply too much force, the nail bed may become loose; the second reason is that the nails are worn back and forth, making it difficult to grasp. The polishing degree may be overdue accidentally, and it is difficult to save at this time.
Wuxi Yaqin Trading Co., Ltd. is a modern professional enterprise integrating production, research and development, sales and service. In addition, we are one of the largest local factory-manufactured products, including abrasive belts, cemented carbide drill bits, ceramic drill bits, diamond drill bits, sanding bands, sanding caps, etc. The company has developed rapidly with excellent quality and honest business philosophy, and has been widely praised by customers all over the world. If you are looking for a reliable, professional and stable supplier, we will be your best choice. If you want more information about the best carbide drill bits, please contact us.
Post time: Jul-05-2021